e 3 ds21221 rev. 7 - 2 1 of 3 gbj25005 - gbj2510 www.diodes.com diodes incorporated features single phase, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. maximum ratings and electrical characteristics @ t a = 25c unless otherwise specified glass passivated die construction high case dielectric strength of 1500v rms low reverse leakage current surge overload rating to 350a peak ideal for printed circuit board applications ul listed under recognized component index, file number e94661 lead free finish/rohs compliant (note 4) gbj25005 - gbj2510 25a glass passivated bridge rectifier case: gbj case material: molded plastic. ul flammability classification 94v-0 moisture sensitivity: level 1 per j-std-020c terminals: plated leads, solderable per mil-std-202, method 208 lead free plating (tin finish). polarity: molded on body mounting: through hole for #6 screw mounting torque: 5.0 in-lbs maximum marking: type number weight: 6.6 grams (approximate) mechanical data gbj dim min max a 29.70 30.30 b 19.70 20.30 c 17.00 18.00 d 3.80 4.20 e 7.30 7.70 g 9.80 10.20 h 2.00 2.40 i 0.90 1.10 j 2.30 2.70 k 3.0 x 45 l 4.40 4.80 m 3.40 3.80 n 3.10 3.40 p 2.50 2.90 r 0.60 0.80 s 10.80 11.20 all dimensions in mm _ b c d ee g h k j i l m n p r s a notes: 1. non-repetitive, for t > 1ms and < 8.3 ms. 2. measured at 1.0 mhz and applied reverse voltage of 4.0v dc. 3. thermal resistance from junction to case per element. unit mounted on 220 x 220 x 1.6mm aluminum plate heat sink. 4. rohs revision 13.2.2003. glass and high temperature solder exemptions applied, see eu directive annex notes 5 and 7. characteristic symbol gbj 25005 gbj 2501 gbj 2502 gbj 2504 gbj 2506 gbj 2508 gbj 2510 unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r(rms) 35 70 140 280 420 560 700 v average forward rectified output current (note 1) @ t c = 100c i o 25 a non-repetitive peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 350 a forward voltage (per element) @ i f = 12.5a v fm 1.05 v peak reverse current @ t c = 25c at rated dc blocking voltage @ t c = 125c i r 10 500 a i 2 t rating for fusing (t < 8.3ms) (note 1) i 2 t 510 a 2 s typical total capacitance (per element) (note 2) c t 85 pf typical thermal resistance junction to case (note 3) r jc 0.6 c/w operating and storage temperature range t j, t stg -65 to +150 c
ds21221 rev. 7 - 2 2 of 3 gbj25005 - gbj2510 www.diodes.com 0.01 0.1 1.0 10 0 0.4 0.8 1.2 1.6 v , instantaneous forward voltage (v) fi g .2 t y pical forward characteristics ( p f er element ) i , instantaneous forward current (a) f 2.0 100 t=25c j 1 10 100 i , peak forward surge current (a) fsm number of cycles at 60 hz fi g . 3 maximum non-repetitive sur g e current t = 25c j single half-sine-wave 0 100 200 300 400 1 100 1000 1.0 10 100 c , total capacitance (pf) t v , reverse voltage (v) fi g .4 t y pical total capacitance, per element r 10 t = 25c j f=1mhz 0.1 1.0 10 100 1000 02040 6080 100 120 140 percent of rated peak reverse voltage (%) fi g .5 t y pical reverse characteristics t = 150c j t = 125c j t = 100c j t = 25c j 0 5 10 15 20 25 30 25 50 75 100 125 150 i , average rectified current (a) o t , case temperature (c) fi g . 1 forward current deratin g curve c resistive or inductive load with heatsink without heatsink
notes: 5. for packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. ds21221 rev. 7 - 2 3 of 3 gbj25005 - gbj2510 www.diodes.com ordering information device packaging shipping gbj25005-f gbj 15/tube gbj2501-f gbj 15/tube gbj2502-f gbj 15/tube gbj2504-f gbj 15/tube gbj2506-f gbj 15/tube GBJ2508-F gbj 15/tube gbj2510-f gbj 15/tube (note 5) important notice life support diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes witho ut further notice to any product herein. diodes incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. the user of products in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on our website, harmless against all damages. diodes incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written appr oval of the president of diodes incorporated.
|